Page 327 - BEGA-katalog-2018-19

Electrical safety
The luminaires in this catalogue are designed and manufactured on the basis of the EN 60598 / VDE 0711 regulations. The majority of the luminaires bear the
corresponding test symbol  on the type plate, packaging and instructions for use. The remaining luminaires have been or are being prepared for testing
but the certification and approval procedure has not yet been completed. Please feel free to contact us at any time for news about the current state of the
approvals. Custom-made products are manufactured on the basis of the above mentioned standard. All luminaires are subject to continuous production
monitoring and quality inspection.

Safety symbols

The ENEC symbol (European Norms Electrical Certification) is Luminaires and power supply units bearing this symbol must
 a European test and certification symbol for luminaires and electrical not be in direct contact with thermal insulating materials.
components in luminaires. The number 10 with or without the VDE
symbol signifies that the test/certification symbol was issued by the
VDE Institute for Testing and Certification.
Surface-mounted luminaires with this symbol are not suitable The symbol = ... °C in accordance with DIN EN 60 598 / VDE 0711
for direct installation on normally flammable building materials. indicates the permissible ambient temperature at which a luminaire
ta = ... °C is allowed to be operated. Our luminaires are generally designed
for an ambient temperature t a = 25 °C, i.e. for indoor use.

Luminaires bearing this symbol are suitable for business premises The CE symbol is affixed at the manufacturer’s responsibility
 where dust or fibrous material present a fire hazard due to their  and is not a safety symbol. The manufacturer uses it to document
D
limited surface temperatures (VDE 0711 Part 2 - 24).
conformity with European Union directives.
Recessed luminaires with this symbol are not suitable for direct The number alongside the CE symbol indicates that an inspection
installation in normally flammable building materials. and certification body checks compliance with the guidelines.
 0780

Lighting planning · Technical information
Good planning work is required to perform lighting applications. Each lighting application has its own specific demands. These depend on many factors such as reflection characteristics
of the environment, the required degree of illuminance, colour rendering etc. We would be pleased to assist in planning lighting systems according to your specifications. The figures
quoted in this catalogue for output and luminous flux are system information – explanations can be found on Pages 320 and 321. The values might change as the result of technical
progress while the catalogue is still in circulation. Current data can be found on the Internet in the data sheets issued for the luminaires at www.bega.com.

Energy efficiency of the lamps
You can find information (in accordance with EU regulation
874/2012) about the energy efficiency of our luminaires in
the tables throughout this catalogue and on our website.
All information is based on the scale A ++ - E.

325
325

Kat62_28_319-330_Ex1.indd 325 26.02.18 13:44