Page 3 -
P. 3
ECTION Figure illustrating
detection area
System will detect objects moving from ~2km/h
to 200km/h Width
Comlight detection algorithms separate object Height of light Typical detection Typical detection Numbers for
detection into two separate data channels for pole width for width for vehicle detection
slow and fast moving objects. This gives the pedestrians at 40 km/h
possibility to customize settings like: 4m ~8m ~15m
Light levels when detection in different 8m
channels 10m ~10m ~18m
Number of light poles activated around ~12m ~20m
different objects
Protective system: IP 66
Detection area will cover all normal light pole
installations Housing material/colour: UV resistant thermoset
plastic, Grey (RAL 7035)
TECHNICAL DATA
Dimensions: Height 295 mm, with 106 mm,
Supply voltage: Nominal 100-240 VAC, Range depth 189 mm (with optional rear cover)
90 – 264V (universal input) 47 – 63 Hz
Cable connector: 7 wires. Length standard 1
Power consumption: 1,5W (peak 4 W with GPRS meter. Extra cable per request
module)
SIM card to be locally provided for the GPRS
Operating temperature: -30°C to + 60°C units.
Sensor: Doppler radar
RF communication: 900 MHz band (ISM), Settings for rush-hour traffic, e.g. temporary
high level intensity at pre-set times of day,
programmable up to +12 dBm (integrated evening or night
antenna)
Crossroad or junction handling
GPRS (Optional)
Time to keep high light level when traffic is
Allows remote access for parameter settings and detected
information retrieval (see Luminizer information).
Remote retrieval of statistical data, e.g:
Time the lamp has been at high or low light
level
PARAMETER SETTINGS
Adjustable parameters like:
Number of light points forward to be triggered
from detecting unit in both fast and slow
detection channel
Light level when traffic is detected
Light level when no traffic is detected
Annell Ljus + Form AB Tel. 08-442 90 00
Tulegatan 15 E-post: info@annell.se
113 53 Stockholm www.annell.se
detection area
System will detect objects moving from ~2km/h
to 200km/h Width
Comlight detection algorithms separate object Height of light Typical detection Typical detection Numbers for
detection into two separate data channels for pole width for width for vehicle detection
slow and fast moving objects. This gives the pedestrians at 40 km/h
possibility to customize settings like: 4m ~8m ~15m
Light levels when detection in different 8m
channels 10m ~10m ~18m
Number of light poles activated around ~12m ~20m
different objects
Protective system: IP 66
Detection area will cover all normal light pole
installations Housing material/colour: UV resistant thermoset
plastic, Grey (RAL 7035)
TECHNICAL DATA
Dimensions: Height 295 mm, with 106 mm,
Supply voltage: Nominal 100-240 VAC, Range depth 189 mm (with optional rear cover)
90 – 264V (universal input) 47 – 63 Hz
Cable connector: 7 wires. Length standard 1
Power consumption: 1,5W (peak 4 W with GPRS meter. Extra cable per request
module)
SIM card to be locally provided for the GPRS
Operating temperature: -30°C to + 60°C units.
Sensor: Doppler radar
RF communication: 900 MHz band (ISM), Settings for rush-hour traffic, e.g. temporary
high level intensity at pre-set times of day,
programmable up to +12 dBm (integrated evening or night
antenna)
Crossroad or junction handling
GPRS (Optional)
Time to keep high light level when traffic is
Allows remote access for parameter settings and detected
information retrieval (see Luminizer information).
Remote retrieval of statistical data, e.g:
Time the lamp has been at high or low light
level
PARAMETER SETTINGS
Adjustable parameters like:
Number of light points forward to be triggered
from detecting unit in both fast and slow
detection channel
Light level when traffic is detected
Light level when no traffic is detected
Annell Ljus + Form AB Tel. 08-442 90 00
Tulegatan 15 E-post: info@annell.se
113 53 Stockholm www.annell.se
